Media Fire
Google Drive
Xiaomi Redmi Note 9S and Note 9 Pro IMEI Repair Gsm Tested File
Hello, Gsm tested File members Today I will tell you how to do Xiaomi Redmi Note 9S IMEI Repair.
Before starting these processes, you must have a UMT Dongle on hand.
UMT Dongle is usually found in cell phone repair shops.
It is a Paid tool.
1) Your device must be rooted to open " USB Diag ".
2) UMT Dongle Ultimate Multi Tool - You will do with the latest version of QcFire.
Root process: Download the
root file in the link I will give below and install " Minimal ADB and Fastboot " on your computer.
Right click on Minimal ADB and Fastboot and open the file location.
There is a " recovery " file in the file you downloaded .
Jump to the Minimal ADB and Fastboot home location.
We get your device in Fastboot mode by holding down the volume down and power button.
We open the minimal ADB and Fastboot program. We type " fastboot flash recovery recovery.img " and click enter.
After this process, there is a small point to be aware of, we write " fastboot reboot " again , we hold down the volume up key before typing.
Then we say Enter.
Your device will enter Twrp mode once and reboot. Do not raise your hand until Twrp mode is stable.
We're throwing Magisk with one clean and formatted flash drive. We connect our device with OTG.
Twrp mode " install "
After the process is over, we do n't say " system reboot ", come back here and enter " Advanced ", enter " Terminal ".
Reset EFS Process:
We open the Minimal ADB and Fastboot program again.
We call it adb shell.
We are writing this code is in order.
dd if = / dev / zero of = / dev / block / sdf
dd if = / dev / zero of = / dev / block / sdf3
dd if = / dev / zero of = / dev / block / sdf4
Your device will be rebooted and rooted and Reset EFS will be done.
Root permission and turn on Diag: We
turn on USB Debugging of your device.
1) adb shell
2) su
3) setprop sys.usb.config diag, adb
IMEI Repair process:
UMT Dongle Ultimate Multi Tool - We open QcFire, we come to " Xiaomi Special " section.
IMEI Repair (RSA Protected) We write our 15-digit IMEI Number.
We call it repair.
You will see a pop-up window where we select the " QCN " File.
And we select the diag we opened.
Other operations will be done automatically and your device will be restarted.
That's it.
Magisk Manager
0 Comments